Site Index - Feedback - Impressum |
| |||||||||
|
|
( Archiv ) | ( Neues Thema ) |
14.06.2005 |
Re: Linksys wpc11 v4 (von: fanpan, 23:46:53) | « ^ » |
>>Ansonsten poste doch mal sicherheitshalber den ganzen Abschnitt "GENRPISM_nif" hier.
--- [IBMWFL] Type = NDIS Title = Generic PRISM driver for PCMCIA/PLX cards Version = 2.0RC4 DriverName = PRISMC$ Xports = NETBEUI, LANDD Copyfile = genprism.msg [FILE] Name = GENPRISM.OS2 Path = IBMCOM\MACS [HW_TYPE] Display = "Hardware type" Type = String StrLength = 10 Set = "PCCARD","PLX" Default = "PCCARD" Optional = NO Editable = YES Help = "Select the type of hardware you want to operate." [NODE_ID] Display = "Station Name" Type = String StrLength = 16 Optional = YES Editable = YES Help = "You can set a station name with this parameter." [NETADDRESS] Display = "MAC Address" Type = HexString StrLength = 12 ;Default = Range = 000000000000-FFFFFFFFFFFF Optional = YES Editable = YES Help = "You can set the MAC Address for the WLAN module with this parameter. This can be useful if your Access Point employs Access Control Lists through MAC Addresses." [DESIRED_SSID] Display = "Network Name (SSID)" Type = String StrLength = 32 Default = "IBM" Optional = YES Editable = YES Help= "You need to provide the Service Set ID of your Wireless LAN. If you want to log on any available WLAN, set this parameter to ANY." [STA_MODE] Display = "Operating Mode of the Card" Type = String StrLength = 6 Set = "BSS","ADHOC" Default = "BSS" Optional = YES Editable = YES Help = "Set this parameter to 'ADHOC' if you are using a Wireless LAN without a base station. For Operation with a base station set the parameter to 'BSS'." [CREATE_IBSS] Display = "Create a Network if none found" Type = String StrLength = 4 Set = "yes","no" Default = "NO" Optional = YES Editable = YES Help= "Set this parameter to 'YES' if you are using a Wireless LAN without a base station and want to create the network cell with this card, if it doesn't exist. This parameter has no effect if you are using a network with a base station." [CHANNEL] Display = "Channel Number" Type = Decimal Range = 0-14 step = 1 Optional = YES Editable = YES Help="This parameter defines the channel which will be used for a new network cell. If the card can't join to a network, it creates its own network cell on the specified channel. NOTE: Depending on the regulatory domain, not all channels are allowed." [PREAMBLE] Display = "Packet Preamble Format" Type = String StrLength = 6 Set = "BOTH","LONG","SHORT" Default = "BOTH" Optional = YES Editable = YES Help = "This parameter allows the configuration of only one preamble type." [RTS_THRH] Display = "RTS/CTS Threshold" Type = Decimal Range = 0-2347 step = 1 Optional = YES Editable = YES Help="This is the threshold for RTS/CTS Medium reservation. Packets with lengths higher than RTS_THRH will use this protocol. Set this value if you experience slow performance or in environments with many WLAN devices." [FRAG_THRH] Display = "Fragmentation Threshold" Type = Decimal Range = 256-2346 step = 2 Optional = YES Editable = YES Help="Packets with lengths above this value will be transmitted in fragments." [SYSTEM_SCALE] Display = "Access Point density" Type = String StrLength = 8 Set = "WIDE","MEDIUM","NARROW" Optional = YES Editable = YES Help="Enter the density of Access Points here." [MW_ROBUSTNESS] Display = "Microwave Oven robustness" Type = String StrLength = 4 Set = "yes","no" Default = "NO" Optional = YES Editable = YES Help="Set this value to 'YES' if you experience interference from microwave ovens." [PSP_MODE] Display = "Power Management" Type = String StrLength = 20 Set = "DISABLED","ENABLED" Default = "DISABLED" Optional = YES Editable = YES Help = "With this parameter you can activate the power management features of the module." [WEP] Display = "Encryption" Type = String StrLength = 4 Set = "DISABLED","WEP64","WEP128" Default = "DISABLED" Optional = YES Editable = YES Help="Set this value according to the key length you want to use. All keys will have the same length. TX_KEY and at least one key must be specified, too." [AUTH_TYPE] Display = "Authentication Type" Type = String StrLength = 12 Set = "OPEN_SYSTEM","SHARED_KEY" Default ="OPEN_SYSTEM" Optional = YES Editable = YES Help = "This parameter specifies the authentication method for encrypted communication. It must be set to the same type that is used by the Access Point." [TX_KEY] Display = "TX Key Number" Type = Decimal Range = 1-4 Optional = YES Editable = YES Help="Number of the encryption key which will be used for transmissions." [KEY_1] Display = "Key 1" Type = String StrLength = 28 Optional = YES Editable = YES Help = "The key must be 5 printable characters for WEP or 13 printable characters for 128 Bit RC4. You may also specify the key in 10 or 26 hex digits with a '0x' as prefix." [KEY_2] Display = "Key 2" Type = String StrLength = 28 Optional = YES Editable = YES Help = "The key must be 5 printable characters for WEP or 13 printable characters for 128 Bit RC4. You may also specify the key in 10 or 26 hex digits with a '0x' as prefix." [KEY_3] Display = "Key 3" Type = String StrLength = 28 Optional = YES Editable = YES Help = "The key must be 5 printable characters for WEP or 13 printable characters for 128 Bit RC4. You may also specify the key in 10 or 26 hex digits with a '0x' as prefix." [KEY_4] Display = "Key 4" Type = String StrLength = 28 Optional = YES Editable = YES Help = "The key must be 5 printable characters for WEP or 13 printable characters for 128 Bit RC4. You may also specify the key in 10 or 26 hex digits with a '0x' as prefix." [WEP_OPTIONS] Display = "WEP Option Flags" Type = Hexadecimal Range = 0-FFFF step = 1 Optional = YES Editable = YES [SUPPLY_VOLTAGE] Display = "Supply Voltage" Type = String StrLength = 10 Set = "3.3V","5.0V" Default = "3.3V" Optional = YES Editable = YES Help="You can specify which voltage should be used for the card." [IO_BASE] Display = "I/O Base address" Type = Hexadecimal Range = 180-7F00 Optional = YES Editable = YES Help= "You can specify a base I/O address for the WLAN module. It needs an even base address and 64 (0x40) contiguous free I/O ports." [IRQ] Display = "IRQ Number" Type = Decimal Set = 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Optional = YES Editable = YES Help= "You can specify an IRQ number to be used with this module." [SHARED_IRQ] Display = "Share the IRQ line" Type = String StrLength = 4 Set = "yes","no" Optional = YES Editable = YES Help="Use this option if you want to force a shared IRQ line. An IRQ number must be specified in this case." [USE_POLLING] Display = "Use polling instead of interrupts" Type = String StrLength = 4 Set = "yes","no" Optional = YES Editable = YES Help="Use this option if you experience problems with the PCMCIA socket. There are some socket service drivers which show an allocated interrupt but dont route any interrupts to the adapter. In this case, TIMER0 is used for operation of the card." [DEBUG_LEVEL] Display = "Debug verbosity level" Type = Hexadecimal Range = 0-FFFF step = 1 Default = FF1F Optional = YES Editable = YES --- guss und dank an dich und fuer deine geduld mit mir... [ Leser: 92 ] |
|
Mit * markierte Felder müssen ausgefüllt werden ! |
( Zeige alle Einträge ) | ( Zur Startübersicht ) |
|
| fanpan | 180 | 13.06.2005 | 14:05 |
| chris\2 | 167 | 13.06.2005 | 14:08 |
| fanpan | 165 | 13.06.2005 | 14:11 |
| chris\2 | 164 | 13.06.2005 | 14:23 |
| fanpan | 157 | 13.06.2005 | 15:01 |
| chris\2 | 155 | 13.06.2005 | 15:22 |
| SST | 160 | 13.06.2005 | 15:44 |
| fanpan | 150 | 13.06.2005 | 15:56 |
| fanpan | 150 | 13.06.2005 | 16:02 |
| chris\2 | 148 | 13.06.2005 | 16:06 |
| fanpan | 149 | 13.06.2005 | 16:15 |
| chris\2 | 142 | 13.06.2005 | 16:28 |
| fanpan | 143 | 13.06.2005 | 16:36 |
| N.N. | 140 | 13.06.2005 | 18:10 |
| chris\2 | 120 | 14.06.2005 | 08:30 |
| fanpan | 130 | 13.06.2005 | 23:31 |
| chris\2 | 121 | 14.06.2005 | 08:32 |
| fanpan | 115 | 14.06.2005 | 08:52 |
| chris\2 | 112 | 14.06.2005 | 09:02 |
| fanpan | 113 | 14.06.2005 | 09:23 |
| chris\2 | 112 | 14.06.2005 | 09:59 |
| fanpan | 102 | 14.06.2005 | 13:14 |
| chris\2 | 103 | 14.06.2005 | 13:32 |
| fanpan | 103 | 14.06.2005 | 13:51 |
| chris\2 | 105 | 14.06.2005 | 14:07 |
| fanpan | 102 | 14.06.2005 | 14:20 |
| chris\2 | 100 | 14.06.2005 | 14:28 |
| fanpan | 100 | 14.06.2005 | 14:38 |
| fanpan | 102 | 14.06.2005 | 14:42 |
| chris\2 | 99 | 14.06.2005 | 14:45 |
| chris\2 | 99 | 14.06.2005 | 14:42 |
| fanpan | 98 | 14.06.2005 | 14:55 |
| chris\2 | 97 | 14.06.2005 | 15:09 |
| fanpan | 92 | 14.06.2005 | 23:46 |
| chris\2 | 88 | 15.06.2005 | 08:16 |
| fanpan | 81 | 15.06.2005 | 11:50 |
| chris\2 | 80 | 15.06.2005 | 12:03 |
| SST | 75 | 15.06.2005 | 12:46 |
| chris\2 | 74 | 15.06.2005 | 13:32 |
| rudi/2 | 72 | 16.06.2005 | 08:56 |
| chris\2 | 67 | 16.06.2005 | 09:47 |
| 80 | 16.06.2005 | 10:01 |
| 81 | 16.06.2005 | 10:02 |
|