IBM hat den print01.sys upgedated (damit hier nicht mehr soviele Fragen sind ;-).
http://service5.boulder.ibm.com/2bcprod.nsf/Driver+Profile+Web/PRINT01.EXE?OpenDocument
(Auszug aus dem irgendwann mal kommenden Configtool 1.x)
Beginning with V. 10.049 PCI Add-On Cards are supported
Parameter:
/IRQ Directs the driver to use IRQs for printing rather than polling.
/SHR This parameter in conjunction with /IRQ parameter directs the PP DD to service PCI IRQs as shared.
<<=NOTE=>> If your printer (for example, old dot matrix printer) generates IRQs without setting interrupt pending (occured) bit in PCI PP status register correctly then you cannot use PCI IRQ sharing and must not use /SHR parameter.
/MPL Directs the driver to use modified polling for printing. This will help lower CPU utilization and enable better performance for other tasks while the printer is being accessed.
/TOU:ddd Specifies maximum wait time in seconds before canceling the print request. This is a 3 decimal digit value (by default - 120 seconds).
[ Leser: 120 ] |