• Incorrect setting of IP address of interface after reconnect due to race conditions
• Fixed "openport returned 3841"
• CheckUser was called every two minutes (rather than every minute)
• Float on top may not work
• Race conditions in NAT engine (Could result in hangs)
• Memory leak in CCP
• Different CCP fixes
• Memory leak in PPPPort (~10-15 bytes per reconnect)

• Multiple UI's: CLI, GUI, console-like
• Intuitive and simple to use 'One button' PM GUI
• PPPoE (PPP over Ethernet) support
• PPP implementation compatible with latest RFC
• Callback
• Dial-On-Demand
• Three TCP/IP packet filters
• NAT (Network Address Translation)
• CCP (Compression Control Protocol)
• PAP (Password Authentication Protocol)
• CHAP (Challenge Authentication Protocol)
• MS-CHAP (Microsoft extension for CHAP)
• REXX API for connection script (compatible with standard PPP.EXE)
• REXX API for authentication
• REXX API for message processing
• REXX API for message log processing
• A set of pre-defined configuration files for most common cases

While people tend to concentrate on PPWIZARD as a html preprocessor it is extremely useful for preprocessing rexx as well, in fact PPWIZARD is a large rexx code which is created by ppwizard! PPWIZARD is also programmable in rexx code. Some of the recent enhancements are to aid in rexx development. PPWIZARD allows you to easily have "libraries" of rexx routines (or even snippets) and reuse these wherever they are required. It is useful for code reuse and can do heaps more than simple file inclusion. If you hand code your HTML web site you may also wish to have a look at PPWIZARD. If you use SSI you should still have a look as PPWIZARD can do heaps more. If you hand code you should seriously consider at
least using SSI and preferably a preprocessor.

• rxICQ
  Rexx API for pwICQ (change status, query contact info, send message, etc from any Rexx script).
• ICQpipe
  Plugin to send notifications to any system pipe designed to be used with SYSBar/2 pipe monitor (source code included).

• Mehr Sterne (~140,000)
• Milchstrasse
• Unterschiedliche Symbole fuer die verschiedenen Arten von DeepSky-Objekten
• Farbausdruck
• Einige Detailverbesserungen (z.B. keine Abfrage bei Programmende)

• Eine Vielzahl von Ordner-Erweiterungen (Statuszeilen, frei konfigurierbare Kontextmenüs, global Sortiereinstellungen, und vieles mehr).
• Erweiterte Dateiassoziationen, die die unlogischen WPS-Verknüpfungen nach Typ und Filter ersetzen.
• Einfaches Management von CONFIG.SYS durch ein neues WPS-Objekt.
• Ein Mülleimer, der alle Löschoperationen auf der WPS abfängt.
• Ersatz-Standardsymbole.
• Verbesserungen für Systemstart und -abschluß: Boot-Logos, ein Ersatz für den Systemstart-Ordner, ein kompletter Ersatz der OS/2-Systemabschluß-Prozedur (mit automatischen Reboot, APM-Abschalten und einem Systemabschluß-Ordner).
• Verbesserungen für Maus und Tastatur ("Sliding focus", "Sliding menus", globale Objekt-Tastenkürzel, neue Ordner-Tastenkürzel, Fenster-Rollen mit Mausknopf 3, usw.)
• Verbessertes Multimedia, wie zB. neue Systemklänge.

• warpin-user
• warpin-dev
• xworkplace-user
• xworkplace-dev

Guiffy features 2-way Interactive and 3-way Smart merging interfaces. It comes complete with full-featured JavaHelp. Guiffy has been tested and is supported on OS/2 Warp4 running Java 1.1.8 with Swing 1.1. Release 1.4 features enhancements for SubFolder(recursive) compares and a new Save As RCS diff File command. Release 1.4 includes Spanish and German translated user interfaces. Guiffy's SmartMerge is enhanced in 1.4 to detect difficult compounded conflicts. License: Fully functional 30-day evaluation. Single User registration is $49.

New Pluto 1.70 features (OS/2 only version):

• Windows 2000 IPSec interoperability.
• Cisco PIX and Cisco IOS VPN compatibility.
• Nortel Extranet Switch 2.6 (or newer) interoperability.

New IPSec 1.70 features:

• New SHS tool for better monitoring of SA negotiations.
• IPSEC.CFG file contents no longer case sensitive.
• SA's using dynamic passwords and extended authentication will now cause InJoy to pop-up a password prompt (requires NEW InJoy version).
• Stand alone IPSec clients with an external IP address can now use NAT to convert the external IP address to a static "inner" IP address (e.g. within the 192.168.x.x or 10.x.x.x segments).
• Cisco config mode support.
• Extended Authentication support.
• Management (clean-up) support of expired SA's.
• Added "exclude_local_ip_from_sa" and "exclude_remote_ip_from_sa" to allow full PKSoft client compatibility.
• Added "isakmp_life_seconds" and "ipsec_life_seconds" configuration attributes to better control the life-time of an SA.

• Die Portfolio-Chartübersicht steht nun für alle Zeittypen zur Verfügung.
• Im DAX-Kamera-Fenster werden unten nun auch Dow Jones, S&P 500 und NASDAQ angezeigt.
• Die neuen Indizes können im Bearbeiten-Menü des Kamera-Fensters einzeln ausgeschaltet werden.
• Bei der Bankgebührenberechnung werden die neuen Comdirect-Gebühren berücksichtigt.
• [Bugfix] Indizes, Aktienlisten und Comdirect-Kurse werden wieder aktualisiert.

• Registry ACL's fuer den Key HKY_CURRENT_USER wurden nicht korrekt gesetzt, z.B. Fehlermeldung beim ersten Logon mit Office 2000 " Fehler 1402. Schluessel konnte nicht geoeffnet werden. ...."
• Neue Umgebungs Variable "USER_PRIV"....Die Umgebungs-Variable USER_PRIV wird abhaengig von den LAN Server Mitgliedschaft gesetzt...

• Multi-window multifunctional text editor capable of processing files. Multi-window HEX editor Text viewer and HEX viewer
• File Manager which looks much like the Norton Commander but is at least twice as powerful
• External mutlifunctional application executor
• Keyboard macro editor and player
• Clipboard window
• Miscellaneous tools (programmer's calculator, alarm clock, ASCII table, calendar)
• Context-sensitive help system.

• PL1
  • localization RUSSIAN_ALT is added.
  • option SET_CHARSET is added. When it is switched off analog does not write charset= to the generated html code.
• PL2
  • lang/rualtdom.tab is created.
  • parameter of command line -c analog.config is added, where analog.config is the path to the configuration file analog.
  • option LANGDIR is added. It determines the catalog with localization. It is necessary when the path to the catalog differs from ../analog/lang/.
  • for using the program as CGI script it is enough to correct several lines in the configuration file.

In this version:

• improved (no, just FULL-REWRITED) unit painting scheme. And now you can change colors for ALL monitor units (clock,swap,disk,etc)!
• New classes: System uptime and CPU monitor
• Tray API for Virtual Pascal/2 included.
• New plugin - SOM Agent. Now in alpha-test version. Ask us about it!
• Fixes in plugin docs
• Fixed bug with configuration saving
• Fixed bug with configuration notebook on Warp 3
• other small fixes..

Systray is what we deal with when we work with operating systems Windows '95/98/NT. Actually besides task switcher it is a convenient utility called system tray. Tray is a section of the screen assigned for the programs not seen in the screen at the moment but active and performing an operation which the user can control through the tray. It differs from task switcher in several aspects:

• The program that has its icon on the tray manages this icon by itself.
• The user s manipulations over the program are sent as a message to it and operate it through the pop-up menu.
• The program gets the mechanism allowing to inform the user about the process of performing an operation. E.g. ReGet, ICQ, The Bat.

How can You help us?
All Systray sources and some documentation (Plugin making reference, System Tray API reference) is included - you are welcome to support YOUR SOFTWARE in system tray. You may also create new plugins. Please let us know about your plans in this case and we'll include yours plugins into next releases.
Thanks for your interesting!
Russian Team OS/2

• Raw files in various binary formats
• Raw textual data
• Amiga 8svx files
• Apple/SGI AIFF files
• SUN .au style files
• - PCM, u-law, a-law
• - G7xx ADPCM files (read only)
• - mutant DEC .au files
• - NeXT .snd files
• AVR files
• CD-R (music CD format)
• CVS and VMS files (continous variable slope)
• GSM files.
• Macintosh HCOM files
• Amiga MAUD files
• IRCAM SoundFile files
• NIST SPHERE files
• Turtle beach SampleVision files.
• Soundtool (DOS) files
• Yamaha TX-16W sampler files.
• Sound Blaster .VOC files
• Microsoft .WAV files
• - PCM, u-law, a-law
• - MS ADPCM, IMA ADPCM
• - GSM
• Psion (palmtop) A-law WVE files
• Pseudo-file fomats that allow direct playing/recording from some audio devices under unix.

• Channel Averaging
• Band-pass filters
• Band-reject filter
• Chorus effect
• Cut out loop samples
• Add an echo
• Add a sequence of echos
• Apply a flanger effect
• Apply a high-pass filter
• Apply a low-pass filter
• Pan sound between channels
• Change the pitch of a sound file
• Display a list of loops in a file
• Add masking noise to a signal
• Apply a phaser effect
• Convert from stereo to mono
• Change sampling rates using several different algorithms. A 'resample' and 'poyphase' effect use high-grade signal rate changes using real signal theory!
  
• Apply a reverb effect
• Reverse the sound samples (to search for Satanic messages ;-)
• Change the speed of samples being played (like speeding up the motor in a tape recorder)
• Stretch/shorten the duration of a sound file.
• Convert from mono to stereo
• Swap stereo channels
• Display general stats on a sound sample
• Trim audio data from beginning and end of file.
• Add the world-famous Fender Vibro-Champ effect
• Adjust volume of samples
  
  -> URL: http://teamos2.ru/files/sox1217.zip
  -> Kommentare: 0 [ Version zum Drucken ] [ Per eMail versenden ]

• Type & Calc: PM-Euro berechnet während der Eingabe die Umrechnung.
• Installationsprogramm: PM-Euro besitzt nun ein komfortables Installationsprogramm.
• PM-Euro kann nun mit anderen Währungen umgehen:
  • Online-Update: PM-Euro lädt die aktuellen Währungsumrechnungen für US-Dollar, Kanadischen Dollar, Australischen Dollar, Englischem Pfund, Japanischem Yen und Schweizer Franken in ein paar Sekunden aus dem Internet. Da bedeutet, das man es nicht manuell aktualisieren, sondern sondern eine Internet-Verbindung herstellen und einfach den 'Online-Update'-Knopf drücken muss, um aktuell umrechnen zu können.

• Full Workplace Shell Intergration and full GUI utilities.
• Zlib compression engine now included.
• File Format changes to be compatible with ZipStream etc for Window NT.
• Installable Compression sub-system. This will allow other developers to build on the file system implementation, to deliver customised file systems that may contain things like 'access control', 'Digital Signatures'., Highly specialized compression schemes etc.

• Information Theft
• Privacy Compromise
• Unauthorised Use

• ECB
• CBC
• Triple ECB
• Triple CBC

• New Function/Change Specifications
  • Modify and upgrade `Multiple External Command' function.
  • Include WallEmer Version 1.11.
• Bug Fix
  • Maintained minor inconveniences and designs.

• AdminUserLogonScript, Setuplc.exe, Manual in HTML, ...

The FREE tool for 32 bit cross-platform development in Pascal. Virtual Pascal is the tool of choice for 32-bit cross-platform development using the Pascal language. It is compatibile with Borland Pascal and Delphi, including the Run-Time Library (RTL), an optimizing compiler, a powerful integrated debugger, and comprehensive online documentation. Virtual Pascal includes support for OS/2, Win32 (Windows 95/98/NT/2000). The latest version is currently v2.1 Beta build 243.

• e206base.zip
• e206rest.zip

As far as I know, pretty much everything is working (at lease as well as it was in v20.3)
There are a number of known issues/bugs (mainly to do with international character support) but I'm happy to receive email about any problems people may experience with this latest version.
For those not familiar with this program, Emacs is a fully featured programmers text editor widely used in the Unix community.

WebMail/2 is divided into two parts, the CGI and the daemon, so your existing webserver will also be used.
Features include:

• WebManager Security (per IP ranges).
• Internal or external user database.
• Support for: Weasel, IPS, InetMail, InetMailPro.
• Dynamicly parsed html files.
• Fully customizable interface.
• Fast REXX CGI that you can customize to your needs.
• MIME file attachments.
• Unlimited emails per account.

• EMX Laufzeitumgebung 0.9d (oder neuer)

• autoCMD für automatische Konvertierungen nach HTML mit Drag&Drop
• ZIP und WPI Archiv
• wvWare.cmd arbeitet nun mit externer Konfigurationsdatei

I've created some patches for Samba which enhance its ability to act as a NetBios Name Server and add the ability to act as a NetBios Datagram Distributor. Without the patches, Samba mirrors how MS WINS servers act - it does not register group names other than type 0x1c properly, and it does not act as an NBDD. Without these features, OS/2 clients cannot logon to domains, OS/2 or NT, if they are using TCPBeui in a routed environment. The patch, by adding those features, allows OS/2 clients and servers to easily use TCPBeui in a routed TCP/IP network. I have only tested this running Samba on Linux, but I imagine it would work on any platform supported by Samba.

-> URL: http://gateway.landy.cx
-> Kommentare: 3 [ Version zum Drucken ] [ Per eMail versenden ]

• * Migrated OS/2 source to current core release
• support real Atari 2600 paddles using a special Real Paddle Adaptor
• Greatly improved Supercharger single-load and multi-load game support
• Improved TIA emulation to support the RESPx multi-sprite trick
• Improved timer emulation (6532 PIA)
• Improved CPU emulation (6502)
• Supports Robot Tank and Decathlon
• Supports Joystick, Keyboard, Booster Grip, and Indy 500 Driving controllers
• Preliminary support for Chris Wilkson's Megacart bank-switching scheme
• Contains properties for over 1300 ROMs
• Optimizations to improve speed
• And much more...


• * improved throttle routines for faster systems
• * added PAL color palette and frame rates
• * new game controller status (which controller needed for current cartridge)
• * settings dialogs
• * keyboard controls are now user definable
• * Keyboard controls have changed

• SDD Beta 35 oder höher wird nun unterstützt
• SNES Mausunterstützung hinzugefügt

• SDDHELP.SYS von der Beta 35 oder neuer (ist enthalten)
• DART-Unterstützung
• EMX .9d Laufzeitumgebung

• This version of rpm is able to handle rpm packages created by rpm version 4.0 included in RedHat Linux 7.0

• making a signature on rpm package with PGP 5.0x tested using PGP ported by (William H. Geiger III)
  
  
  -> URL: http://www2s.biglobe.ne.jp/~vtgf3mpr/linux/rpm.htm
  -> Kommentare: 0 [ Version zum Drucken ] [ Per eMail versenden ]

• fixed unjustified "could not load some bitmap" errors from loading skins.
• wavplay.dll would play part of the last buffer twice.
• fixed another possible crash in os2audio.dll, should be crashless now.
• Everything now compiled with VAC++ 3.08 (instead of GCC/EMX)!!! Gone are the weird PMSHELL hanging stack overflow problems related to thread issues with EMX.
• Skins now load their analyzer .dat file from their respective directory.
• Equalized sound was not updated when loading .EQ file.
• All INI files are now saved in pm123.exe directory, including analyzer.ini and scroller.ini. DELETE OLD ANALYZER.INI
• ID3 Tag Editor no longer crashes in PMCTLS.DLL, it updates the main window info display, and the year is now loaded properly.
• Mutes and Preamp were not restored properly in the EQ.
• RealEQ updated to 1.20 -> now you can save your settings in .REQ files.
• Fixed possible crash when unloading skins.
• Fixed possible crash when loading skins missing their .pak bundle.
• Horizontal volume bar did not draw properly when using +/- keys to set volume.
• A crash could occur at the end of a playback with specana_dobands() (analyzer.dll uses it)
• Playlist Manager now indicates "no statistics" when there is none.
• Playlist Manager now opens to the Playlist directory when adding playlists.
• Filenames with a ';' can now be loaded in playlists. An encoding scheme a la URL using % is now automatically so all filenames containing the wildest characters you can imagine coming from your server will load properly.

• HTTP content length was not always found from some HTTP servers. fixed in http123.dll 1.04

• Implemented MMX !!! Wow, this really kicks arse...
• Now using the Hamming window instead of von Hann.
• Now using the ISO R10 standard serie.
• Changed when calculations are made, snappier GUI, and doesn't make noise when adjusting the EQ anymore.

• MMX check box was not restored

• Equalizer Settings can now be saved in seperate .REQ files.
• Removed unused variables from memory, might be faster on small L1 cache CPUs (ie.: not AMD CPUs)
• Corrected imprecision reading slider values.

• Some corrections on "Network" page in choosing your Internet/Intranet LAN adapters installed in your system (LAN0-:-LAN7).
• Add new video devices found in SDD Beta 35 to Video adapter and video memory identification algorithm.
• Added CPU/FPU Benchmarks, based on public algorithms (DhryStote & FLOPS). The results shown are normalized to typical Intel Pentium 166MMX + EDO RAM performance.
• Added File System IO BenchMarks that analize your file system performance. The results are shown in KBytes per second for reading and writing tests. Thouse tests are launched 2 times - first using internal file system cache and next - without any caching.

• Installation with WarpIn
• Included CMD script like aWGet.cmd for automatically converting and storing your files in preselected directory.